Finally getting stuff done on our cars

[Pushit2.0]

We did look at and set the knock table when it was running 15psi with a very safe tune. The knock sensor is the same as a 2g. We do not think it was knocking due to the plugs not showing any signs of detonation, the knock noise table did pretty much the same thing the hole time it was on the dyno, the A/F were on the rich side to keep the motor cool, and the intake temps were around 100deg, not bad for a sidemount car on the dyno and the car pulled smooth and the power curve is smooth as well. As said befor, we wanted to test the limit of a stock rods, we did and now the rods will be upgraded.

~John