MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-20-2008   #11
Shane@DBPerformance
formerly ecoli
 
Shane@DBPerformance's Avatar
 

Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
Send a message via AIM to Shane@DBPerformance
Re: stroker kit help

Most cars don't have rods nearly as strong as the ones found in DSMs, so even if there were some, there is a good chance that they wouldn't be worth using anyways.

EGT don't tell you that much. They are effected the most by ignition timing. High timing = low EGTs, low timing = high EGTs. They don't tell you if the car is detonating or going to blow up. You should see over 1400f though even under perfectly normal conditions. Was the sensor probe after the turbo or bad?
Shane@DBPerformance is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:11 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.