been working on it the last 2 days. Pulled the engine out of the corner. Pulled the valve cover to swap in the FP2 cams and one of the cam cap bolts pulled all the threads with it
was not happy since it was the cnc ported head that is now junk and is all taken apart for scrap now. Luck I had one good 2g head that will be going on the engine now since that is what I had laying around.
so today I got the short block,tranny,t.c,and axles,and down pipe in the car
also took the turbo apart to cut out the flapper since I will be running a tial 38 gate
cut the flapper arm off flush and put it back in and welded it back on
all back together out
Threaded Mode