|
I will have a lot more photo's once mine gets done. That was just one that Brian took of his before install. The V-band is just above the O2 bung (if you want to see what it looks like). Normally it would be above it, but the Garrett that he uses was more difficult to make than a Mitsu exhaust housing.
I will have a hookup on V-bands shortly. These are 100% stainless too, most are only stainless for the clamp, the flanges on these are stainless too. That should ensure a good seal even if it is old.
I just got the tri-mix gas, so I am all set up for welding stainless. I will hopefully have pic's up tonight.
__________________
Is burning corn and stayin' warm!
My motorcycle is stock and reliable, my Talon is neither!
|
Threaded Mode