03-05-2008
|
#1
|
New Member
Join Date: Mar 2008
Location: Wisconsin
Posts: 28
|
Attempt to make things right
Well hello MitsuStyle. I understand that I'm already a bit of a "Star" here. I guess I'm here because I feel that if you're going to bash on someone you don't even know, you could at least invite them to beating......right? I mean, you found me on MNSC, and you found my "Ricer Board" so why not contact the site creator and owner (myself) and let me know that there is a lynching and I am involved?
I'm not here to start any more problems because I can clearly see that Jake has started plenty. I also see that he has fessed up to most of them and apologized as well. I personally, just found out about all this sh!t goin down and I have taken ownership of Vogel Performance since the 1st of January. Am I bit pissed off.....uh, yeah. Am I thinking about pulling the plug all together on the whole project.....fuckin right. I too was lied to and kept in the dark.
Basically, the money that was collected was used to keep the rent paid and what-not until the SBA loan came through. I had NO idea where the money came from that was paying the rent. I was told that it was obtained legitimately.
Jake needed me for my credit, obviously, to help get the loan. But, because the loan is 100% in my name, I also have a contract done up by a lawyer to protect myself. I have a lot invested in this "project" and won't get left with my dick out in the wind, I assure you. I will also see what I can do to make previous engagements "right" once again. I understand that there is money owed, or engines owed and I will do what I can to see those promises fulfilled. I won't lie, the SBA loan has not come through yet, so we are idle at this time. Anyone who has dealt with the government knows it can take forever to get things done.
Once the loan comes through we are planning on getting an AWD dyno, mandrel pipe bender, welder, trailer, jet-wash, and various other equipment to help us on our way. I will tell the 2 guys that made the trek to Winona (whom I don't know, BTW) that your situation will be taken care of before any other purchases will be made with that money. What happened to you guys was bullshit, and I can understand why you're pissed. I would be too. Cali to Winona is quite a drive (I should know, I drive truck for a living) so I can clearly gauge how pissed you were/are.
I hope that clears things up a bit. After reading all the threads on different DSM sites, I'm not sure how much business I'll actually have, but it's something I've wanted to do for a long time. I used to wrench for a shop after 2 years of tech school and they didn't pay squat. So I got into truckin to make some good money. I told myself that I would never wrench again unless it was for myself. Now I have the opportunity and it's blemished by this. Consider me equally annoyed. If Jake were an equal partner in this, I would have already backed out. But currently, I am the owner of Vogel Performance. I am going to attempt to ride this out and hope that I can help heal the proverbial scarring that Jake has left with the name.
Lastly, I would ask that since Vassil, Brian, or any of you guys don't even fuckin know me, in all my "douche-ness," I would appreciate keeping me out of your little conversations. I work hard to keep my name out of the mud, and I don't need a bunch of e-thugs on a forum trashing my name and my website for something Jake did to you. If you're all butt-hurt over what Jake did, take it up with Jake. But hoping that I go down with him, and threatening to print fliers so that MY business fails, or showing up to MY dyno day to attempt to ruin me is not appreciated, in the least bit. I hope you can understand my frustration here. I just caught wind of this, and I am doing what I can to make it right. And please don't think that I am some 18 year old street-punk that doesn't know jack shit about the world and how to operate. Again, I see maybe three names on this site of people that would know a little about me, but none of you here KNOW me. So if you're going to attack me, and or my "Ricer Board" then at least invite me to the fight.
Sorry we had to meet this way.
Neil Chittendon
Owner: Vogel Performance
www.autotechniques.org/forums
neil@vogelperformance.com
Last edited by nchittendon; 03-05-2008 at 09:20 AM..
|
|
|
03-05-2008
|
#2
|
back in the saddle again
|
Re: Attempt to make things right
Welcome to the forums, and I would suggest talking to the admins if you are going to advertise or even mention your shop.
FYI we have an awd chassis dyno for sale as well .
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
|
|
|
03-05-2008
|
#3
|
Totenritt
Join Date: Nov 2004
Location: Gardner, KS
Drives: Cranberry Plastic, Shiny red Bayliner with a V10
Posts: 1,670
|
Re: Attempt to make things right
Hello Neil. I have no idea what happened but hey, good luck with your new undertaking.
__________________
When you can leave two black strips from the apex to the braking zone, you have enough power~Donohue
Last edited by Shotgun!; 03-05-2008 at 01:11 PM..
Reason: ispelllikearetarded5yearold
|
|
|
03-05-2008
|
#4
|
Finally Tuned...
Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
|
Re: Attempt to make things right
Im confused, where is the original link?
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**
Amsoil Dealer
|
|
|
03-05-2008
|
#5
|
Pewp Champion
Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
|
Re: Attempt to make things right
Welcome, and good luck with turning your companies image around.
|
|
|
03-05-2008
|
#6
|
New Member
Join Date: Mar 2008
Location: Wisconsin
Posts: 28
|
Re: Attempt to make things right
Quote:
Originally Posted by niterydr
Welcome to the forums, and I would suggest talking to the admins if you are going to advertise or even mention your shop.
|
My bad, I was just mentioning the fact that I am the new owner and not Jake. Admins, do what you will to clear up any problems with the post.
The original thread is HERE
Otherwise, thank you for the welcome. I don't have a DSM of my own, but will take this opportunity to get know the inner workings of DSM's and the like because it will only help me improve and gain knowledge. That, and I just felt like I needed to defend myself a little bit.....i'm sure you can understand that.
|
|
|
03-05-2008
|
#7
|
Pewp Champion
Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
|
Re: Attempt to make things right
Quote:
Originally Posted by nchittendon
I drive truck for a living
|
Anyone else find that line to be a little humurous!
|
|
|
03-05-2008
|
#8
|
Join Date: Jan 2008
Location: osceola wisconsin
Drives: gutlass
Posts: 787
|
Re: Attempt to make things right
hey man. i don't know what happened in the past so your all good with me. hope to see you posting often and hopefully your shop will grow.
|
|
|
03-05-2008
|
#9
|
back in the saddle again
|
Re: Attempt to make things right
Quote:
Originally Posted by nchittendon
My bad, I was just mentioning the fact that I am the new owner and not Jake. Admins, do what you will to clear up any problems with the post.
The original thread is HERE
Otherwise, thank you for the welcome. I don't have a DSM of my own, but will take this opportunity to get know the inner workings of DSM's and the like because it will only help me improve and gain knowledge. That, and I just felt like I needed to defend myself a little bit.....i'm sure you can understand that.
|
Oh yeah, understandable!
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
|
|
|
03-05-2008
|
#10
|
New Member
Join Date: Mar 2008
Location: Wisconsin
Posts: 28
|
Re: Attempt to make things right
Quote:
Originally Posted by Halon
Anyone else find that line to be a little humurous!
|
I explained that I wan't making good enough money wrenching fresh out of school and I have been driving trucks ever since. Getting this shop up and running is my ticket out of the truck and as far away from this lifestyle as possible. I have an awesome wife and 15 month old at home that I miss dearly every day, so I'm doing everything I can to get out of the truck and be home more.
I guess I don't see the humor.......
|
|
|
03-05-2008
|
#11
|
immune from paybans
Join Date: Oct 2005
Location: West Des Moines
Drives: poorly
Posts: 4,358
|
Re: Attempt to make things right
Quote:
Originally Posted by nchittendon
I drive truck for a living
|
Quote:
Originally Posted by Halon
Anyone else find that line to be a little humurous!
|
Quote:
Originally Posted by nchittendon
I guess I don't see the humor.......
|
I believe he was talking about your grammar, not the fact that you drive a truck.
Anyway, welcome to the forum!
|
|
|
03-05-2008
|
#12
|
|
Re: Attempt to make things right
Yea the grammar made it borat-like. Thats why I chuckled too.
Welcome.
|
|
|
03-05-2008
|
#13
|
Pewp Champion
Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
|
Re: Attempt to make things right
MMM I drive Truck, I sling poo at you, mmm you want fuck my truck? I like the way you talk MM
|
|
|
03-05-2008
|
#14
|
Pewp Champion
Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
|
Re: Attempt to make things right
BTW, Spain just owned my soberness, no offense, you just sounded like a monkey man and I'm drunk so it was pretty humorous.
|
|
|
03-05-2008
|
#15
|
Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
|
Re: Attempt to make things right
^its funny, welcome.
|
|
|
03-05-2008
|
#16
|
back in the saddle again
|
Re: Attempt to make things right
Nothing wrong with being a truck driver, someone needs to move goods around the country.
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
|
|
|
03-05-2008
|
#17
|
New Member
Join Date: Mar 2008
Location: Wisconsin
Posts: 28
|
Re: Attempt to make things right
Hmmmm..........I guess I'm retarded or something. Still don't see it.
Was I supposed to say I drive trucks? I lick truck? I hump truck? Perhaps I need to consume some beverage before reading it again.
My apologies for having bad grammar. I am only a trucker, after all. haha
Oh, and it's "HUMOROUS".....not humurous. (touche).
|
|
|
03-05-2008
|
#18
|
Join Date: Dec 2004
Location: I am a Little Canadian
Posts: 518
|
Re: Attempt to make things right
welcome.
|
|
|
03-05-2008
|
#19
|
New Member
Join Date: Mar 2008
Location: Wisconsin
Posts: 28
|
Re: Attempt to make things right
Quote:
Originally Posted by sleepy2lazy
welcome.
|
Thank you much.
|
|
|
03-06-2008
|
#20
|
Pewp Champion
Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
|
Re: Attempt to make things right
I have nothing against truckers. I just simply found it funny how it sounded like broken English "I drive Truck". That's all. Easy mistake. I was a bit drunk last night too, that's my excuse! Again, welcome and best of luck!
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|