MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-16-2006   #6
Black97civic
35mpg
 
Become the 16-Bit Wizard Champion!
Join Date: Oct 2003
Location: Minnetonka, MN
Posts: 731
Send a message via AIM to Black97civic
Re: Conquest won't start.

Quote:
Originally Posted by Kougar
Leaky injector makes sense, but if the primary is good...how would it leak? The secondary doesn't come on until the demand for fuel is increased, right?
It still gets pressure, so if seals are bad it would get passed them and drip out.

Quote:
Does the car rev normal within the 10 working seconds? Or JUST idle? After the thing dies, try taking off the EGR (hopefully you have an EGR blockoff, making it easier) and see if fuel leaks out.
Haven't tried to rev it yet, will report back in a little bit.

Quote:
The FPR is good, right? Perhaps that has a leak? Have you pulled the vacuum hose off it to see if fuel drips past?
FPR doesn't leak fuel, and holds good 38-40 psi at idle.
Black97civic is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 03:12 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.