|
Re: 1991 eagle talon big project
You didn't need to swap the entire harness in the first place. All you need to add to the N/A harness is the resistor pack, and knock sensor. Seems simple enough, the knock sensor is one ground and one wire to the ECU
http://www.dsmtuners.com/forums/arti...onversion.html
__________________
Quote:
Originally Posted by scheides
I swing from the nuts of cold hard data. Anything less is a guess.
|
Last edited by goodhart; 05-12-2012 at 11:19 AM..
|
Threaded Mode